Sales & Support: Request A Quote
Home ProductsHIMA

RS 485 PCI: Interface card RS 485 Interface extension card for personal computers

RS 485 PCI: Interface card RS 485 Interface extension card for personal computers

RS 485 PCI: Interface card RS 485 Interface extension card for personal computers

Product Details:

Place of Origin: Germany
Brand Name: hima
Certification: TUV SIL3
Model Number: RS 485 PCI: Interface card RS 485 Interface extension card for personal computers

Payment & Shipping Terms:

Minimum Order Quantity: 1
Price: USD 3000-10000 PCS
Packaging Details: Factory
Delivery Time: 8-10weeks
Payment Terms: T/T, Western Union
Supply Ability: 1 PCS 8weeks
Contact Now
Detailed Product Description

Tommi

Automation(china)Co.,Ltd
Add:No. 466, Zhou City Road, Pudong New Area, Shanghai,China.
TEL:86-21-58111208
Phone:86-18917810582
Skype:MTL-CHINA
QQ: 2068679144
Email:automation_tommi@163.com
web:www.automation-china.com

 

RS 485 PCI: Interface card RS 485 Interface extension card for personal computers

RS 485 PCI: Interface card
RS 485 Interface extension card for personal computers

The card contains two independent RS 485 interfaces as an extension for a PC (PADT). The
interfaces are electrically isolated (also among themselves) and suitable to connect HIBUS-2
directly to programmer units and visualization stations.
Baud rate 9.6 to 57.6 kBaud
Data format any
Basis addresses automatic configuration
Interrupts automatic configuration
Isolation (electric isolation) > 1 kV
Connections 2 Sub-D plugs 9-pole
Operating data 5 V / 0.2 A
Dimensions 120 x 106 mm
Weight approx. 110 g

 

Circulating Fan K 9203
Circulating fan drawer with three axial fans,
with fan run monitoring

Installation: At any location in the 19-inches field
Application: Forced ventilation of 19-inches installations
Note: The positions of the axial fans in the K 9203 drawer are adapted to
the subracks of the recessed HIMA subrack systems.
Display of operation and errors:
Operation status Connector pin 4-5
Contact
Connector pin 5-6
Contact
LED
FAIL
LED
24 V
Without fault open closed OFF ON
Operating voltage
missing or
fuse failure
closed open OFF OFF
Fan fault * closed open ON ON
* Fan speed < 75...85 % of the rated speed
Material Aluminium, anodized
Operating data 24 V DC / 750 mA
Air flow rate 280 m3 per hour
Life time at 40 °C 70 000 h
Weight 1.8 kg

 

H 7506: Bus terminal
for the installation of HIBUS-2 (RS 485)

The bus terminal consists of a 25-pole Min-D socket to connect single channel PES and redundant
PES H41q/H51q via the data cables BV 7040 or BV 7046.
The connections for the 2-wire bus are made by means of two 6-pole terminal blocks. By selection
of two switches the bus terminating resistors can be switched on at each end of the 2-
wire bus. If the bus terminal block H 7506 is used at the end of the 2-wire bus then the terminal
block X2 cannot be connected.
Use of the bus terminal H 7506 see the following application and the applications in data sheet
H 7505.

 

H 4135: Relay amplifier in an electronic housing
for safety-related circuits up to SIL 3 according to IEC 61508
(RC 1...6 according to DIN V 19250 / 01.89)

The module is tested according to
- IEC 61508 / SIL 3
- EN 298,
- DIN VDE 0116,
- DIN EN 50178 (VDE 0160),
- (DIN V 19250 / RC 1...6, DIN V VDE 0801 incl. A1).
The relay amplifier is suitable for the switching of safety-related circuits.
Thus the amplifier can be used for safety shutdowns, e. g. to cut off the
entire fuel supply for incinerator plants.
The module is equipped with relays in diversity.
The connection terminal 8 may be used only for monitoring the fuse F1,
but not to supply a voltage for the contact!
Restrictions
For SIL 3 applications (according to IEC 61508) function checks have to
be made within a period of 3 years, for SIL 2 applications within a period
of 6 years.
The replacement of components must be made only by the manufacturer
regarding the valid standards and TÜV restrictions.
Input 24 V DC / -15...+20 %, £ 40 mA
Output floating NO contact
Relay data: cf. reverse
Switching time approx. 8 ms
Reset time approx. 6 ms
Ambient conditions -25...+60 °C
Degree of protection IP 20 according to IEC/EN 60529
H 4135 (0430)
2/2
The relay amplifier has a safe isolation between the input and the output
contact, according to DIN EN 50178 (VDE 0160). The clearance in air and
the creepage distance are dimensioned for overvoltage class III up to
300 V.
Relay data
Contact material Silver alloy, gold-flashed
Switching voltage ³ 5 V,
£ 250 V AC / £ 127 V DC
Switching current ³ 10 mA, £ 4 A
Switching capacity AC £ 500 VA, cos j > 0.5
£ 830 VA, cos j > 0.9
Switching capacity DC up to 30 V: £ 120 W
up to 70 V: £ 50 W
up to 127 V: £ 25 W
Bounce time approx. 1 ms
Life
mechanical ³ 30 x 106 cycles
electrical ³ 2.5 x 105 cycles
(with full resistive load and
£ 0.1 cycles per second
Mechanical design and dimensions
Cross section of £ 2.5 mm2 (AWG 14)
connecting wires
Mounting on DIN rail 35 mm or on C profile
Mounting position horizontal or vertical
Assembling distance not required

 

F 8652E: Central module
Use in the PES H41q-MS, -HS, -HRS,
Safety-related, applicable up to SIL 3 according to IEC 61508

Central module with two clock-synchronised microprocessors
Microprocessors INTEL 386EX, 32 bits
Clock frequency 25 MHz
Memory per microprocessor
Operating System Flash-EPROM 1 MB
User program Flash-EPROM 1 MB *
Data SRAM 1 MB *
* Efficiency depending on operating system version
Interfaces Two serial interfaces RS 485 with electric isolation
Diagnostic display Four digit matrix display with selectable information
Shutdown on fault Safety-related watchdog with output 24 V,
loadable up to 500 mA, short-circuit proof
Construction Two European standard PCBs,
one PCB for the the diagnostic display
Space requirement 8 SU
Operating data 5 V / 2 A
F 8652E
Switch S1 Battery
F 8652 E (0507)
2/3
Table 1: Pin assignment of the interface RS 485, 9-pole
Pin RS 485 Signal Meaning
1 - - not used
2 - RP 5 V, decoupled by diodes
3 A/A’ RxD/TxD-A Receive/Transmit Data A
4 - CNTR-A Control signal A
5 C/C’ DGND Data Ground
6 - VP 5 V, positive pole of power supply
7 - - not used
8 B/B’ RxD/TxD-B Receive/Transmit Data B
9 - CNTR-B Control signal B
Before withdrawing a central module its fixing screws must be loosened
completely and freely movable. The module must be withdrawn
and inserted uninterruptedly to prevent triggering any faulty signals in
the system!

F 8652 E (0507)
3/3
Diagnostic display of the central module
– Four digit alphanumerical display,
– two LEDs for the general display of errors (CPU for the central modules, IO for the testable
input/output modules),
– two toggle switches to request detailed error information,
– push-button ACK resets the error indication;
in failure stop ACK behaves like restarting the system.
For further information on the diagnostic display and lists of error codes, refer to the documentation
"Functions of the operational system BS 41q/51q" (also on ELOP II CD).
Notes for event recording
– Up to 2048 events can be defined.
– The buffer can store up to 500 events.
Notes for start-up and maintenance
– Lifetime of the buffer battery (without voltage feeding):
1000 days at TA = 25 °C
200 days at TA = 60 °C
– It is recommended to change the buffer battery (CPU in operation) at the latest after 6
years, or with display BATI within three weeks
(Lithium battery, e. g. type CR 2477N, HIMA part no. 44 0000018)
– Check the bus station no. and transmission rate at switch S1 for correct settings
– Important: When upgrading an F 8652 to an F 8652E module the fan concept is also to be
changed!

 

F 8650X: Central module
Use in the PES H51q-MS, -HS, -HRS,
Safety-related, applicable up to SIL 3 according to IEC 61508

Central module with two clock-synchronized microprocessors
Microprocessors INTEL 386EX, 32 bits
Clock frequency 25 MHz
Memory per microprocessor
Operating System Flash-EPROM 1 MB
User program Flash-EPROM 1 MB *
Data SRAM 1 MB *
* Degree of utilization depending on operating system version
Interfaces Two serial interfaces RS 485 with electric isolation
Diagnostic display Four digit matrix display with selectable information
Shutdown on fault Safety-related watchdog with output 24 V,
loadable up to 500 mA, short-circuit proof
Construction Two European standard PCBs,
one PCB for the diagnostic display
Space requirement 8 SU
Operating data 5 V / 2 A

For the serial interface only the bus station no. 1-31 can be set.
Within an Ethernet network the bus station no. can be set from 1 to 99. Therefore the switches
S1-6/7 must be set in addition to the switches S1-1/2/3/4/5.
The number of the communication partners within a network is still limited to 64.
This enhanced setting of the bus station no. is only possible from operating system BS41q/51q
V7.0-8 (05.31) of the central module.
Applications with the communication module F 8627X:
– connection of the central module to a PADT (ELOP II TCP)
– connection to other communication partners within an Ethernet network (safeethernet,
Modbus TCP)
The communication runs from the central module via the backplane bus to the communication
module F 8627X and from the Ethernet ports of the F 8627X into the Ethernet network and vice
versa.
Special features of the central module:
– Self-education: from operating system BS41q/51q V7.0-8 (05.31)
– ELOP II TCP: from operating system BS41q/51q V7.0-8 (05.31)
Further informations about the bus station no., ELOP II TCP, loading of operating systems and
application programs (self-education) et al. corresponding to the central module you will find in
the data sheet of the F8627X as well as the operating system manual of H41q/H51q and the
safety manual of H41q/H51q.
Pin RS 485 Signal Meaning
1 - - not used
2 - RP 5 V, decoupled by diodes
3 A/A’ RxD/TxD-A Receive/Transmit Data A
4 - CNTR-A Control signal A
5 C/C’ DGND Data Ground
6 - VP 5 V, positive pole of power supply
7 - - not used
8 B/B’ RxD/TxD-B Receive/Transmit Data B
9 - CNTR-B Control signal B
Before removing a central module its fixing screws must be completely
loosened and freely movable. Remove the module from the bus board
by pushing the ejection lever (front label) top down and quickly removing
in an upward motion to ensure that faulty signals are not triggered
within the system!
To attach the module, place it on the terminal block and press it
inwards as far as it will go. This action should be performed quickly to
ensure that faulty signals are not triggered within the system!
F 8650X (0606)
4/4
Function of the ejection lever with front label
Figure 2: Function of the ejection lever
Diagnostic display of the central module
– Four digit alphanumerical display,
– two LEDs for the general display of errors (CPU for the central modules, IO for the testable
input/output modules),
– two toggle switches to request detailed error information,
– push-button ACK resets the error indication;
in failure stop ACK behaves like restarting the system.
For further information on the diagnostic display and lists of error codes, refer to the documentation
"Functions of the operational system BS 41q/51q" (also on ELOP II CD).
Notes for start-up and maintenance
– Lifetime of the buffer battery (without voltage feeding):
1000 days at TA = 25 °C
200 days at TA = 60 °C
– It is recommended to change the buffer battery (CPU in operation) at the latest after 6
years, or with display BATI within three months
(Lithium battery, e.g. type CR 2477N, HIMA part no. 44 0000018)
– Check the bus station no. and transmission rate at switch S1 for correct settings
– Important: When upgrading an F 8650 to an F 8650X module the fan concept has also to
be changed!

 

F 8627X:Ethernet module
F 8627X Communication Module for Ethernet-Communication
Application in H41q/H51q PES (beginning with OS 41q/51q V7.0-7 (9906)).
Appertaining ELOP II Function block: HK-COM-3

 

1Technical data
Processor 32 bit Motorola CPU MPC860T with integrated
RISC communication controller
Operating voltage 5 V
Current consumption 1 A
Space required 3 HU (units high), 4 SU (units wide)
Ethernet Interface 10BaseT or 100Base TX according to the IEEE 802.3 standard,
connection via an RJ-45 plug.
HSR Interface High-speed serial communication interface to the redundant
HSR (High Speed Redundancy) communication module.
Connection via an RJ-12 plug with BV 7053.
Serial Interface The serial interface FB is not used.
Diagnostic Display 6 LEDs for display diagnostic during operation.
DIP switches 2 DIP switches for setting the module functions

 

2Functions of F 8627X
2.1General
A H41q/H51q controller can simultaneously exchange via an F 8627X non safety-related data
with a HIMA OPC server and safety-related data via safeethernet. In this case, the F865x central
module ensures safety.
Beginning with operating system version 4.x, the F 8627X supports the functions "MODBUS
TCP slave" and "ELOP II TCP". The ELOP II TCP connection provides a fast data exchange
between a PADT (PC) and the F 865x central module.
2.2Operating system versions
Overview of the operating system versions which can be loaded into the F 8627X.
The F 8627X is delivered with operating system version 4.x
2.3Compatibility of the F 8627X with the F 8625
• The modules must operate in HIPRO-S Mode (S1/7 "OFF").
• "Passive mode" may only be switched on if supported by the redundant F 8625/
F 8627X module.
Note The F 8627X has the same functions as the F 8627 and is compatible
with it. The new fuctions are only supported in an F 8627X with operating
system V4.x or higher.

 

F 8621A: Coprocessor module
Use in PES H41q/H51q (from BS41q/51q V6.0-6 (9808) with ELOP II)

 

The coprocessor module has its own microprocessor HD 64180 and operates with a clock frequency
of 10 MHz. It contains mainly the following functions:
– 384 kbyte static memory, CMOS-RAM and EPROM on two ICs; battery buffering of the
RAMs on power supply monitoring module F 7131 (H51q)
– at H41q subrack battery buffering via buffer batteries on rear PCB
– 2 interfaces RS 485 (half-duplex) with galvanic isolation and own communication processor.
Transmission rates (set by software): 300, 600, 1200, 2400, 4800, 9600, 19200,
57600 bps, or takeover of the values which are set on the CU via DIP switches
– Dual Port RAM for fast alternating memory access to the central module

 

Note In central subracks of H51q systems the coprocessor module can be
used only in the slots CM1 to CM3.

 

RS 485 PCI: Interface card RS 485 Interface extension card for personal computers

 

 

 

 

 

 

 

 

 

 

Contact Details
Automation (china) Co.,Ltd

Contact Person: Mrs. Tommi

Tel: 86-21-58111208

Send your inquiry directly to us (0 / 3000)