Sales & Support: Request A Quote
Home ProductsHIMA

F7133 F7130 F7131

F7133 F7130 F7131

    • F7133 F7130  F7131
    • F7133 F7130  F7131
  • F7133 F7130  F7131

    Product Details:

    Place of Origin: Germany
    Brand Name: hima
    Certification: TUV SIL3
    Model Number: F7133 F7130 F7131

    Payment & Shipping Terms:

    Minimum Order Quantity: 1
    Price: USD 3000-10000 PCS
    Packaging Details: Factory
    Delivery Time: 8-10weeks
    Payment Terms: T/T, Western Union
    Supply Ability: 1 PCS 8weeks
    Contact Now
    Detailed Product Description

    Tommi

    Automation(china)Co.,Ltd
    Add:No. 466, Zhou City Road, Pudong New Area, Shanghai,China.
    TEL:86-21-58111208
    Phone:86-18917810582
    Skype:MTL-CHINA
    QQ: 2068679144
    Email:automation_tommi@163.com
    web:www.automation-china.com

     

    F7133 F7130  F7131

    F 6217: 8-channel analog input module
    safety-related, applicable up to SIL 3 according to IEC 61508
    • for current inputs 0/4...20 mA, voltage inputs 0...5/10 V
    • with safe isolation
    • resolution: 12 bits
    Figure 1: Block diagram and front cable plug
    Interpretation of channel bit faults for each channel to project in ELOP II.
    Input voltage 0...5.5 V
    max. input voltage 7.5 V
    Input current 0...22 mA (via shunt), 22 mA = 4095
    max. input current 30 mA
    R*: Shunt with 250 Ω; 0.05 %; 0.25 W;
    current input T<10 ppm/K; part-no: 00 0710251
    Resolution 12 bit, 0 mV = 0, 5.5 V = 4095
    Measurand update 50 ms
    Safety time < 450 ms
    Input resistance 100 kΩ
    V-Analog GND-Analog
    Front cable plug
    Note: see also
    information about
    Block diagram cable plug Z 7128
    Time const. input filter approx. 10 ms
    Basic error 0.1 % at 25 °C
    Operating error 0.3 % at 0...+60 °C
    Error limit related on safety 1 %
    Electric strength 200 V against GND
    Space requirement 4 SU
    Operating data 5 VDC / 80 mA, 24 VDC / 50 mA

     

    F 3331: 8-channel output module
    safety-related, applicable up to SIL 3 according to IEC 61508
    •resistive or inductive load up to 500 mA (12 W)
    •lamp connection up to 4 W
    •with integrated safety shutdown, with safe isolation
    •with line monitoring
    •no output signal at break of the L- supply
    Figure 1: Block diagram and front cable plug
    Appertaining function block: HB-BLD-3 or HB-BLD-4
    The module is automatically tested during operation. The main test routines are:
    –Reading back of the output signals. The operating point of the 0-signal read back is
    ≤ 6.5 V. Up to this value the level of the 0-signal may arise in case of a fault and this
    will not be detected
    –Switching capability of the test signal and cross-talking (walking-bit test)
    Outputs500 mA, short-circuit proof
    Internal voltage dropmax. 2 V at 500 mA load
    Admissible line resistance (in + out)max. 11 Ω
    Undervoltage trippingat ≤ 16 V
    Output leakage currentmax. 350 μA
    Output voltage if output is resetmax. 1.5 V
    Current input WDmax. 30 mA
    Monitored switching timemax. 200 μs
    Space requirement4 SU
    Operating data5 VDC / 130 mA
    24 VDC / 180 mA plus load

     

    F 3330: 8-channel output module
    safety-related, applicable up to SIL 3 according to IEC 61508
    •resistive or inductive load up to 500 mA (12 W)
    •lamp load up to 4 W
    •with integrated safety shutdown, with safe isolation
    •no output signal with break of the L- supply
    Figure 1: Block diagram and front cable plug
    The module is automatically tested during operation. The main test routines are:
    –Reading back of the output signals. The operating point of the 0-signal read back is
    ≤ 6.5 V. Up to this value the level of the 0-signal may arise in case of a fault and this will not be detected
    –Switching capability of test signal and cross-talking (walking-bit test).
    Outputs 500 mA, short-circuit-proof
    Internal voltage dropmax. 2 V at 500 mA load
    Admissible line resistance (in + out) max. 11 Ω
    Undervoltage trippingat ≤ 16 V
    Operating point f. short-circuit current0.75...1.5 A
    Outp. leakage currentmax. 350 μA
    Output voltage if output is resetmax. 1.5 V
    Current input WDmax. 30 mA
    Monitored switching timemax. 200 μs
    Space requirement4 SU
    Operating data5 VDC / 110 mA
    24 VDC / 180 mA plus load

     

    F 3322: 16-channel output module
    resistive or inductive load up to 500 mA (12 W), lamp connection up to 12 W
    with safe isolation
    no output signal at break of the L- supply
    Block diagram
    Planning note
    Only max. 10 output modules with nominal load may be used in one I/O subrack, and not more
    than half of the possible output loads of 16 x 0.5 A (= 8 A) may be switched on at the same time.
    The standard fusing of the modules in the I/O subrack is 4 A slow blow.
    Outputs k short-circuit proof, 500 mA
    Response value for
    current limiter > 550 mA
    Space requirements 4 SU
    Operating data 5 V DC / 110 mA
    24 V DC / 150 mA plus load

     

    F 3237: 8-channel input module

    safety-related, applicable up to SIL 3 according to IEC 61508,
    • for the connection of safety-related proximity switches,
    proximity switches according to EN 60947-5-6 (NAMUR) and
    resistor-wired sensors
    • monitoring of the lines for short-circuit and line break

    Appertaining function block: HB-RTE-3
    The module is automatically tested completely during operation. The main test routines are:
    - Switch on and switch-off capability
    - Crosstalk of the input circuits by walking-zero
    - Function of the input filters
    - Correct function of the module
    The function of LEDs are not tested.
    Switching time approx. 10 ms
    Operating points IE
    0-signal 0.35 ≤ IE ≤ 1.2 mA
    1-signal 2.1 ≤ IE ≤ 6.0 mA
    wire break ≤ 0.28 mA
    short circuit ≥ 6.5 mA
    Line impedance ≤ 50 Ω (acc. to EN 60947-5-6)
    Line length ≤ 1000 m (∅ = 0.5 mm2)
    Supply voltage US 8.2 V
    Shunt R* 681 Ω; 1 %; 0.25 W
    (R17...R24) part no. 00 0751681
    Space requirement 4 SU
    Operating data 5 VDC / 90 mA; 24 VDC / 170 mA

     

    BV 7055: Data connecting cable
    Connection of bus terminal H 7506 to converter Edgeport/2i (USB / RS 485)
    in systems H41q/H51q
    Standard lengths: 2 m , 4 m

     

    BV 7046: Data connecting cable
    Connection of the bus terminal H 7506 to the interface in the
    H41q/H51q systems (redundant systems)
    Standard lengths: 2 m, 4 m

     

    HIMA devices for current distribution
    It is recommended to use the HIMA supplies and current distributions:
    4.1.2 Supply 24 VDC
    The 24 VDC power supply can be feeded three times to the system H51q-HS/HRS (starlike
    wiring). See also catalog H41q/H51q, chapter 4.3, The Input/Output Level, 24 VDC Supply and
    Distribution.
    4.1.3 Output 24 VDC
    With installation of the assembly kit a conductive connection to the
    frame or a separate earth connection has to be installed according to
    the EMC requirements.
    Connection PE earth: Faston 6.3 x 0.8 mm.
    Pay attention for the manufacturers information concerning detaching
    and replugging of the Faston connectors!
    K 7212 redundant feeding up to 35 A total current, with 2 decoupling diodes and 2 network
    filters, with fusing of up to 12 single circuits with circuit breakers or
    K 7213 redundant feeding up to 35 A total current, with fusing of up to 12 single circuits
    with circuit breakers or
    K 7214 redundant feeding up to 150 A total current, with fusing of up to 18 single circuits
    with circuit breakers or
    K 7215 redundant feeding up to 150 A total current, with fusing of up to 18 single circuits
    with circuit breakers, graphical display.

     

    Communication modules F 8627/F 8628, F 8627X/F 8628X
    Right of each central module of the H51q-HS/HRS PES up to five communication modules can
    be installed. The communication module mainly contains:
    – 32-bit RISC microprocessor
    – Operating system
    – RAM for further protocols
    – F 8627 Ethernet interface (safeethernet, OPC, ...)
    F 8628 Profibus-DP slave interface
    – Dual port RAM (DPR) for the communication with the central module via CPU bus
    Special applications with the communication module F 8627X:
    – connection of the central module to a PADT (ELOP II TCP)
    – connection to other communication partners within an Ethernet network (Modbus TCP)
    Special application with the communication module F 8628X:
    – ELOP II TCP connection (PADT) via the Ethernet interface of the F 8628X to the H41q/
    H51q controller

     

    Coprocessor module F 8621A

    Right of each central module of the H51q-HS/HRS PES up to three coprocessor modules can
    be installed. The coprocessor module mainly contains:
    – Microprocessor HD 64180 with a clock frequency of 10 MHz
    – Operating system EPROM
    – RAM for a PLC master project
    – Two interfaces RS 485, via communication software function block setting of the baud rate
    up to 57600 bps
    – Dual port RAM (DPR) for the communication with the central module via CPU bus

     

    HRS contains the essential functions demonstrated in the block diagram of the central module:
    Figure 2: Block diagram of the central module F 8650X
    – two clock-synchronized microprocessors
    – each microprocessor with an own memory, one processor operates with real data and program
    and the other one with inverted data and program
    – testable hardware comparer for all the external accesses of both
    microprocessors, in case of a fault the watchdog will be set to the safe status and the status
    of the processor is announced
    – Flash-EPROMs of the program memory for the operating system and the user program
    usable for min. 100,000 writing cycles
    – Data memory in sRAM
    Note Operating system/resource type in ELOP II
    The assembly kit is usable since operating system BS41q/51q V7.0-8.
    Resource type in ELOP II: H51qe-HS/H51qe-HRS.
    Watchdog
    B 5233-1/-2 / H51q-HS/HRS (0605)
    3/14
    – Multiplexer to connect I/O bus, DPR and redundant CU
    – Battery backup of the sRAMs via batteries with monitoring
    – 2 interfaces RS 485 with galvanic isolation. Transm. rate: max. 57600 bps
    – 4digit diagnostic display and 2 LEDs for information out of the system, I/O level and user
    program
    – Dual Port RAM for fast memory access to the second central module
    – Hardware clock, battery buffered
    – I/O bus logic for the connection to the input/output modules
    – Watchdog
    – Power supply monitoring, testable (5 V system supply)
    – Battery monitoring

     

    B 5233-1/-2: Assembly Kit /
    H51q-HS/HRS: System
    System H51q-HS/HRS in K 1412B system subrack, 5 HU, 19 inches with redundant central
    module, power supply 24/5 V, power supply monitoring module, I/O bus connection, communication
    modules (optional), coprocessor modules (optional) and three fans
    H51q-HS / B 5233-1: single channel bus, redundant central modules
    H51q-HRS / B 5233-2: redundant bus, redundant central modules
    TÜV certified, applicable up to SIL 3 according to IEC 61508

     

    Parts of the B 5233-1/-2 assembly kit /
    H51q-HS/H51q-HRS system
    • 1 x K 1412B central rack, 5 units high, 19 inches, with cable tray with three fan modules
    K 9212, hinged receptacle for the label and backplane Z 1001.
    • additional modules on the rear
    • 3 x Z 6011 decoupling and fusing to feed the power supply modules
    • 1 x Z 6018 fan run monitoring and fuse monitoring
    • 2 x Z 6013 decoupling and fusing of the supply voltage for the WD signal
    • 2 x F 7546 bus termination module (B 5233-1)
    • 4 x F 7546 bus termination module (B 5233-2)
    • 1 x BV 7032 data cable (only B 5233-1)
    includes the modules:
    • 3 x F 7126 power supply modules 24 V / 5 V, 10 A (PS1, PS2, PS 3)
    • 1 x F 7131 power supply monitoring
    • 2 x F 8650X central modules (CU1, CU2)
    modules for option (separate order)
    • 6 x F 8621A coprocessor modules (CM11 - CM13, CM21 - CM23)
    • 10 x communication modules (CM11 - CM15, CM21 - CM25)

    Assembly kits to be used for the I/O level:
    • B 9302 I/O subrack 4 units high, 19 inches
    • B 9361 additional power supply, 5 VDC, 5 units high, 19 inches
    The max. current must be 18 A (all I/O modules and the modules in the central rack), if
    3 x F 7126 are used to keep the system in operation even one power supply module F 7126
    has failed.
    Values of the current requirement (+5 VDC) refer to the data sheets.

     

     

    F7133 F7130  F7131

     

     

     

     

     

     

     

     

     

     

    Contact Details
    Automation (china) Co.,Ltd

    Contact Person: Mrs. Tommi

    Tel: 86-21-58111208

    Send your inquiry directly to us (0 / 3000)